Description

EDS-3G, Server

Code: M61012.

• Protocol: Modbus Circutor
• Communications: Ethernet | 3G
• Nº relays: 6
• Digital inputs: 8

INFORMATION

DESCRIPTION

The EDS-3G is a device that offers the same features as its predecessor, the EDS. The EDS-3G features PowerStudio Embedded management software, with a web server and Ethernet connection, in addition to a brand-new feature that lets you connect via a built-in 3G router. This new connectivity lets you establish wireless communication with points that have no possibility of having an ADSL connection, in order to access the information stored by the EDS-3G or to incorporate it into a superior energy management system, such as PowerStudio Scada.

Its most salient features include:

• Parameterisation and management of automatic events
• Alarm recording system and system event management
• E-mail alarms.
• RS-485 port for connecting up to 5 CIRCUTOR devices.
• Ethernet connection
• 3G connection
• Centralisation of alarms through detection of logical states or centralization of consumption by pulses.

APPLICATIONS

Remote application without Internet access: with EDS-3G you can control the partial consumption of each of the loads in an installation that is located in a place with difficult access and where it is difficult to provide ADSL connections. Its built-in 3G router enables connection to this equipment.

• Efficient, easy and simple control of the consumption
  of your remote sites where connection is difficult
• Know the value of leakage currents and the status of earth leakage relays
• Energy reports per consumption zone or site
• Remote alarms for excess consumption or incidents in the electrical network
• No need for a computer

Multi-point application without ADSL connection: In a distribution of loads (or remote installations) without an Internet connection or where a VPN (Virtual Private Network) is not available, the EDS-3G lets you control the individual consumption of each of the installations and centralize them in one, using the 3G connection.

• Efficient, easy and simple control of the consumption of your remote sites
• Energy reports per consumption zone or site
• Remote alarms for excess consumption or incidents in the electrical network.
• Possibility of comparing consumption for each site.
• No need for a computer
• Possibility of connection when specified: the system acts automatically.
• Supervise the level of harmonics and the reactive load of your installation.

• SPECIFICATIONS
• AC POWER SUPPLY
• Consumption
• 6-10 VA (CA) / 3-4 W (CC)
• Frequency
• 50 … 60 Hz
• Nominal voltage
• 85…264 Vca/120…300 Vcc
• MECHANICAL CHARACTERISTICS
• Size (mm) width x height x depth
• 90 x 105 x 105 (mm)
• Envelope
• Plastic UL 94 – V0 self-extinguishing
• Weight (kg)
• 0,333
• ENVIRONMENTAL CHARACTERISTICS
• Protection class
• IP 20
• Relative humidity (without condensation)
• 5…95%
• Working temperature
• -10 … +60 °C
• STANDARDS
• Certifications
• CE, UL
• Electrical safety, Maximum height (m)
• 2000
• Electrical safety, Installation category
• CAT III , IEC 61010
• Standards
• UL 94, UNE-UNE-EN 61010-1, UNE-EN55011, UNE-EN 6100-4-2, UNE-EN 61000-4-3, UNE-EN 61000-4-11, UNE-EN 61000-6-4, UNE-EN 61000-6-2, UNE-EN61000-6-3, UNE-EN 61000-4-5
• COMMUNICATIONS
• Band
• UMTS/HSPA – 2100 / 900 Band GSM – 850 / 900 / 1800 / 1900 Band
• Data bits
• 8
• Stop bits (ModBus)
• 1
• Parity
• Non-pair-impar
• Protocol
• HTTP / Modbus RTU
• Speed
• 4800 … 115200
• Connection mechanism
• Ethernet 10BaseT / 100BaseTX autodetectable
• ELECTRICAL SAFETY
• Insulation
• Double-insulated electric shock protection class II (IEC 61010-1)
• USER INTERFACE
• Display format
• Alphanumeric 2 Lines
• Resolution of the display
• 20 characters
• DIGITAL INPUTS
• Input/output insulation
• 1,5 kV
• Type
• Free of optoisolated voltage
• Maximum short-circuit current
• 50 mA
• DIGITAL RELAY OUTPUTS
• Quantity
• 6
• Maximum current
• 5A
• Maximum open contact voltage
• 250 V ~
• Electrical life
• 3 x 10⁴(250 Vca / 5 A)
• Mechanical life
• 2 x 10⁷
• Maximum switching capacity
• 750 VA